When to Prune in Louisiana
Much of Louisiana is zone 9a, where the last spring frost comes around Mar 1. The pruning season opens with shade trees on Dec 21. Every date below moves with your own frost, so a ZIP times them for your yard.
What to prune in Louisiana now
Pick your zone, or type a ZIP code for dates timed from the frost at your own address.
Reading today’s date to sort the list.
Louisiana pruning calendar for zone 9a
The dates below are timed from the median last spring frost here, Mar 1.
Fruit
Apples and pears
Jan 18 to Mar 1
Late winter, while dormant. Thin crowded and crossing branches first, then shorten. The coldest weeks are past by the time the window opens, so cuts heal with spring growth.
“Fruit trees should be pruned on an annual basis in late winter, preferably after the coldest weather is past and before buds break and growth begins.”
Peaches, nectarines and plums
Jan 25 to Mar 1
Just before bloom to two weeks after petal fall. The last fruit trees to prune. Waiting until the buds swell lets you see winter damage and cut it out.
“The best time to prune is from just before bloom to 2 weeks after petal fall.”
Grapes
Jan 18 to Feb 22
Early spring, before buds swell. Cut back to the canes or spurs you keep for this year. Grapes drip sap from spring cuts; it does them no harm.
“Early spring is also the best time to prune most small fruits with woody stems, such as grapes, raspberries, blueberries, gooseberries, and currants.”
Raspberries and blackberries
Jan 18 to Feb 22, then May 15 to Jun 19
Early spring, and again after the summer harvest. Summer bearers: cut the canes that fruited to the ground after the last pick. Fall bearers grown for one crop: cut every cane to the ground before spring growth.
“After the last harvest, cut all canes that have produced fruit to ground level and remove them.”
Flowers
Roses
Jan 18 to Feb 15
As new growth emerges in early spring. Cut dead canes back to green wood when the buds start to swell. Roses that bloom once a year, such as many climbers and old garden roses, are pruned after they flower instead.
“Roses that experience winter die-back are best pruned by removing dead wood just as new growth emerges in early spring.”
Panicle and smooth hydrangeas
Jan 11 to Feb 15
Late winter or early spring. These bloom on this year's growth, so a spring cut costs no flowers. The white snowball and cone shaped kinds are usually these.
“Prune in late winter or early spring.”
Bigleaf and oakleaf hydrangeas
May 10 to Jun 19
Just after the flowers fade. These set next year's buds on this year's stems. A fall, winter or spring cut removes the flowers. Reblooming kinds can take a light spring cleanup as well.
“Prune just after the flowers fade.”
Crape myrtles
Jan 11 to Feb 15
Late winter, before new growth. They bloom on new wood, so a late winter cut costs nothing. Thin to a few trunks and leave the height alone: lopping every stem at one height (crape murder) leaves knobby stubs and weak, floppy shoots.
“Because crapemyrtles are summer-blooming trees, producing flowers from new wood or current season stems, the proper time to prune is late winter or early spring prior to new growth.”
Shrubs
Spring flowering shrubs
Feb 22 to Apr 12
Lilac, forsythia, azalea, rhododendron, spirea, viburnum
Right after they flower. They bloom on last year's wood. Pruning before they flower cuts off this spring's show.
“They generally bloom before the end of June and should be pruned immediately after flowering.”
Summer flowering shrubs
Dec 28 to Feb 8
Rose of Sharon, butterfly bush, potentilla, summer spirea
Late winter or early spring. They bloom on new wood, so cut them before growth starts.
“Prune summer-flowering shrubs in late winter or early spring.”
Trees
Shade trees
Dec 21 to Feb 1
Late winter, while dormant. With the leaves off you can see the branch structure, and the cuts start to close as soon as growth begins. Take out dead, broken and crossing limbs first.
“Most trees should be pruned during the late dormant season (February through March).”
Maples, birches and elms
Dec 21 to Feb 1, then Mar 26 to Apr 20
Late winter, or early summer once leafed out. These drip sap from late winter cuts. It looks alarming and does the tree no harm. If the dripping bothers you, prune in early summer instead, once the leaves are full size.
“Some trees have free-flowing sap that "bleeds" after late winter or early spring pruning. Though this bleeding causes little harm, it may still be a source of concern.”
Junipers, yews and arborvitae
Feb 1 to Feb 22
Late winter, just before new growth. Shear lightly. Junipers and arborvitae do not regrow from bare wood inside the green, so never cut them back past the foliage. Yews do, which is why they take hard shaping.
“Prune evergreen shrubs, such as juniper and yew, in late March or early April before new growth begins.”
Pines
Mar 22 to Apr 15
Early summer, at the candle stage. Pinch or cut the new shoots (candles) by up to half while they are still soft. Spruce and fir have side buds and can be pruned when dormant.
“Pine branches should be pruned or pinched in early summer when the new branch (candle) has begun to elongate but before the needle bundles open.”
Frost dates: the median of 41 NOAA stations in Louisiana's zone 9a, 1991 to 2020.

The Louisiana pruning year
Zone 9aZones from the 2023 USDA map; frost dates from NOAA’s 1991 to 2020 normals; timing rules from the extension guides quoted under each plant.
Louisiana extension pruning guides
“Often, pruning is best done during winter when trees go dormant and the leaves have dropped.”
Every link checked Nov 18, 2026.

When to prune crape myrtles in Louisiana
They bloom on the new season’s growth, so the cut comes in late winter, before the buds break: Jan 11 to Feb 15 in zone 9a. Take out suckers, crossing branches and dead wood, and thin a crowded plant to a few trunks.
Crape murder
Crape murder is cutting every trunk back to the same stubby height each winter. The knobs it leaves sprout a broom of thin shoots, and their heavy flower heads bend them over. Leave the trunks their full height, and where a big crape myrtle has outgrown its spot, a smaller variety fits better than a yearly topping.
“Topping (buck horning or dehorning) involves cutting stems back at an arbitrarily chosen height rather than pruning back to a bud, side branch, or main stem.”