
Termite Swarm Season in Delaware: 2026 Timing & Risk
1 species, peak swarms April 1 – May 5, infestation probability zone II (moderate to heavy) — plus whether today is swarm weather in Wilmington, Dover, Georgetown.
Next swarm window opens March 15 (Eastern subterranean) · 157 daysThe Delaware termite year at a glance
Typical window, checked against today's dateDelaware's flat Coastal Plain and shallow water table mean subterranean colonies rarely have to dig far for moisture — a crawlspace vapor barrier is the single best prevention investment here.
Is today swarm weather in Delaware?
Subterranean termites launch on the first warm (70°F+), humid, calm days after a soaking rain inside their window; drywood and dampwood species fly on warm, still late-summer evenings. The rows below read today's high, humidity, the last 48 hours of rain, and wind for Delaware's three reference cities and score them against the species windows that are open right now (none open today, so the score is capped).
| City | High today | Humidity | Rain, last 48 h | Wind | Swarm conditions |
|---|---|---|---|---|---|
| Wilmington | … | … | … | … | Loading |
| Dover | … | … | … | … | Loading |
| Georgetown | … | … | … | … | Loading |
Score 0–10: Unlikely 0–2.9 · Possible 3–5.4 · Likely 5.5–7.4 · Swarm conditions 7.5+. Weather from api.open-meteo.com, read in your browser when the page loads. A high score means conditions favor a flight somewhere nearby — not that your house is infested.
Which termites swarm in Delaware, and when
Eastern subterranean termite
Reticulitermes flavipes- Swarms in Delaware
- March 15 – May 31, daytime after rain
- Local notes
- Swarms begin in late March in Sussex County and reach Wilmington by early-to-mid April, almost always on a warm afternoon after overnight rain.
- Damage pattern
- Slow but relentless; colonies of 60,000–1,000,000 enter through foundation cracks and mud tubes.

Delaware is in termite infestation probability zone II
The International Residential Code's Termite Infestation Probability Map (built on US Forest Service survey data) divides the country into four bands. Local jurisdictions use it as the basis for the termite-protection requirements they write into the code; homeowners can use it to set expectations. The figure names those bands rather than numbering them — the zone I–IV shorthand here is ours, not the code's, and the figure warns its lines are approximate. Delaware: zone II, moderate to heavy. The mid-South, the Mid-Atlantic, the lower Midwest, and the interior and desert Southwest — Arizona, Nevada, and New Mexico included. Infestations are common; routine inspection is the norm in home sales. In the low-desert metros the local pressure runs well above what this band suggests.
Very heavy
The Gulf and Deep South — Louisiana, Mississippi, Alabama, Georgia, Florida, South Carolina, and eastern and coastal Texas — plus nearly all of California. The band's northern edge runs near the North Carolina line, and we place North Carolina here on the strength of its coastal plain. (We place Hawaii here too; the code figure maps only the lower 48.) Termites reach most structures eventually, and in this band the code also bars below-grade foam plastic on foundation walls and slabs.
Moderate to heavy
The mid-South, the Mid-Atlantic, the lower Midwest, and the interior and desert Southwest — Arizona, Nevada, and New Mexico included. Infestations are common; routine inspection is the norm in home sales. In the low-desert metros the local pressure runs well above what this band suggests.
Slight to moderate
The northern tier, the Rockies, and the Pacific Northwest. Colonies are localized; carpenter ants cause more wood damage than termites do.
Bands are assigned to each state's populated core; several states straddle a boundary (the state note above says which parts). No public-domain copy of the IRC map is available, so the zones are listed rather than drawn.
Delaware termite hotspots
Wilmington and New Castle County
Old rowhouse neighborhoods and the state's densest housing.
Dover
Slab-on-grade subdivisions on wet Coastal Plain soils.
Rehoboth and the Sussex beaches
Sandy soils, high water tables, and beach homes empty during April swarms.

Signs of termites in Delaware homes
Swarmers vs. flying ants
Termites: straight antennae, thick waist, four equal wings twice the body length. Ants: elbowed antennae, pinched waist, front wings longer than hind. Save a few in a bag — identification decides everything that follows.
Discarded wings
Swarmers shed their wings minutes after landing. Piles of identical translucent wings on a windowsill, in a spider web, or on a tub floor are the most common first sign — often with no insects left in sight.
Mud tubes
Pencil-width earthen tunnels climbing a foundation wall, pier, or plumbing penetration. Subterranean termites build them to stay moist between soil and wood. Break one open — live workers inside mean an active colony.
Frass (drywood pellets)
Drywood termites push six-sided, sand-like pellets out of kick-out holes — tiny piles under a window frame, rafter, or furniture. Drywood species are not established in Delaware; pellets here usually point to imported furniture.
Hollow or blistered wood
Baseboards that sound papery when tapped, paint that bubbles like water damage, doors that suddenly stick. Subterranean galleries run with the grain and are packed with mud; drywood galleries are clean and cross the grain.
Moisture clues
Termites follow water. A leaking hose bib, a downspout dumping at the foundation, mulch piled against siding, or a damp crawlspace is where inspectors look first.


What to do when you see a swarm in Delaware

Preventing termites in Delaware
Prevention is mostly moisture and wood-to-soil management, and most of it costs a weekend rather than a contract. In a zone II state, these are the habits that keep a home off the treatment list:
- Keep 6 inches of visible foundation between soil or mulch and any siding, trim, or sill plate. Mulch piled to the siding is the most common entry invitation inspectors find.
- Move water away. Downspout extensions, grading that slopes away from the house, and a crawlspace vapor barrier remove the moisture subterranean colonies need.
- Break wood-to-soil contact. Deck posts on metal standoffs, no firewood or lumber stacked against the house, stumps removed, and fence posts that don't touch the foundation.
- Seal slab and foundation penetrations where plumbing and conduit enter — termites need a crack the width of a business card.
- Fix leaks fast. A dripping hose bib or AC condensate line against the foundation creates a permanent wet spot that colonies home in on.
- Inspect annually — a $75–$150 professional inspection (or a thorough flashlight walk of the crawlspace and foundation each spring) catches mud tubes years before structural damage.
Delaware termite swarm FAQ
More Delaware pest timing
More Southeast termite swarm seasons
Swarm windows are climatological typicals compiled from land-grant extension guidance (UF/IFAS, LSU AgCenter, Texas A&M, UC IPM, and state extension services) and from the IRC Termite Infestation Probability map; any single year runs 1–3 weeks either side. Cost ranges are general industry figures, not quotes. Live conditions from Open-Meteo. Delaware extension guidance: www.udel.edu/academics/colleges/canr/cooperative-extension/. National picture: where termites are swarming right now →
Hero image: “Formosan termite alates” — USDA Agricultural Research Service (Scott Bauer) — Public domain